Exciter Model: ESAC8B_GE

Following checks and corrections are applied during Validation and AutoCorrection.

• If 0 < Te < Mult*TimeStep then Te = Mult*TimeStep
• If 0.0 < Ta < 0.5*Mult*TimeStep then Ta = 0, ElseIf 0.5*Mult*TimeStep < Ta < Mult*TimeStep then Ta = Mult*TimeStep
• If 0.0 < Tdr < 0.5*Mult*TimeStep then Tdr = 0, ElseIf 0.5*Mult*TimeStep < Tdr < Mult*TimeStep then Tdr = Mult*TimeStep
• If 0.0 < Tr < 0.25*Mult*TimeStep then Tr = 0.0
  ElseIf 0.25*Mult*TimeStep < Tr < 0.5*Mult*TimeStep then Tr = 0.5*Mult*TimeStep
• Kpr and Kir: Kpr can't be 0 if Kir = 0, if true then Kpr changed to 40.
• If Vrmax < Vrmin then swap the values
• If Vfedmax < Vfedmin then swap the values

Mult represents the user-specified value Minimum time constant size as multiple of time step option on the Validation page of the Transient Stability Dialog

TimeStep represents the integration time step being used as described on TimeStep

Following treatment is handled during the transient numerical simulation

• If Vr > Vrmax, then Vrmax = Vr limits or if Vr < Vrmin, then Vrmin = Vr